UK-based developer of ultra-fast-charging batteries Nyobolt, is taking its high-power density, fast-charging battery technology from the lab into the real world by revealing the first running Nyobolt EV prototype.
Designed and engineered with CALLUM, the Nyobolt EV will be used to both validate the company’s battery performance in a high-performance environment, as well as allow car makers to witness an elevated customer experience where inconvenient charging downtime is thing of the past.
Initial in-vehicle testing using powerful 350kW (800V) DC fast chargers has already confirmed that Nyobolt EV’s 50Ah 35kWh battery can be charged from 10 per cent to 80 per cent in four minutes 37 seconds – with a full charge enabling the prototype to achieve a range of 155 WLTP miles. That is twice the speed of most of the fastest charging vehicles today. Furthermore, as the first four minutes are at a constant current of 500A, this provides 120 miles of range after just four minutes of charging.
Nyobolt’s technology also solves the levels of degradation that typically come with supercharging lithium-ion batteries. Nyobolt’s 24.5Ah cells have already successfully completed over 4,000 full DoD (Depth of Discharge) fast charge cycles, equating to over 600,000 miles (965,606 km) if used in the Nyobolt EV pack, while still retaining over 80 per cent battery capacity. This is many multiples higher than the warranties of much larger EV batteries on the road today.
Independent OEM testing has confirmed its 2.6Ah cells can achieve over 4,400 cycles with a 12C charge and 1C discharge at 23°C. Crucially, the cell internal resistance rises by only 50 per cent after 4,400 five-minute charge cycles. This is lower than the industry accepted end of life values for EV cells, which is typically twice the initial value.
“Despite some OEMs showing fast charge times in the region of 15 minutes, a closer inspection reveals the charge is usually across a limited SOC region specifically chosen to limit the amount of life taken out of the cell; for instance, between 20-80 per cent,” says Nyobolt’s co-founder and CEO, Dr Sai Shivareddy. “Typically, the charge profile will only hold these peak charge levels for a short amount of the charge time. Nyobolt’s low impedance cells ensure we can offer sustainability, stretching out the battery’s usable life for up to 600,000 miles in the case of our technology demonstrator.”
The 35kWh battery pack in the Nyobolt EV prototype not only adds miles faster but the compact battery pack size benefits car makers and motorists, enabling energy efficient electric vehicles that are cheaper to buy and run, and crucially use fewer resources to manufacture.
It’s no accident that the Nyobolt EV is a sports car weighing just 1,250kg; it underlines that Nyobolt can also enable the automotive industry to return lighter, better handling sports cars. “We can enable OEMs to build excitement back into the segment, which is literally weighed down by legacy battery technology currently,” says Shane Davies, Nyobolt’s director of vehicle battery systems.
“Our Nyobolt EV demonstrates the efficiency gains facilitated by our fast-charging, longer-life battery technology, enabling capacity to be right-sized while still delivering the required performance,” adds Davies. “Nyobolt is removing the obstacle of slow and inconvenient charging, making electrification appealing and accessible to those who don’t have the time for lengthy charging times or space for a home charger.”
Whilst the priority use for this Nyobolt EV is showcasing and testing the battery technology, CALLUM’s team has engineered it so that low volume production – for road or track use – is possible. Nyobolt’s battery assembly plans are more advanced and could be in production at low volume within a year, ramping to 1,000 packs in 2025. Nyobolt’s flexible manufacturing model enables volumes of up to two million cells per year. Nyobolt’s battery will also comply with the EU’s Battery Regulation requirements once in production.
The Nyobolt EV’s architecture also highlights how it could be retrofitted to existing EV platforms, bringing a step change in charge time and battery cycling life. The Nyobolt EV’s battery modules are cooled via cold plates with a water/glycol mix. The battery circuit uses an AC compressor and condenser and a battery chiller, compatible with other performance vehicles, and results in a near standard module and battery pack. The limited heat generation – no more than 60°C during a fast charge or a performance drive – is influenced in the main by the ultra-low impedance cell chemistry.
Nyobolt’s technology builds on a decade of battery research led by University of Cambridge battery scientists Professor Clare Grey CBE and Dr Sai Shivareddy, who had invented cutting-edge supercapacitors. Key to Nyobolt’s unique ability to offer ultra-fast charging without impacting battery life is its low impedance cells that generate less heat, making it easier to manage such high-power levels during charging. Its anode materials in lithium-ion battery cells allow for a faster transfer of electrons between the anode and cathode.
Nyobolt is already in conversation with a further eight vehicle OEMs about adopting its technology. Alongside automotive applications, Nyobolt’s fast-charging technology is set to be deployed this year in robotics with other applications such as heavy-duty commercial vehicles seeking low downtime and high-productivity, also advancing.
“Our extensive research here in the UK and US has unlocked a novel battery technology that is ready and scalable right now,” concludes Nyobolt’s co-founder and CEO, Dr Sai Shivareddy. “We are enabling the electrification of new products and services currently considered inviable or impossible. Creating real-world demonstrators, such as the Nyobolt EV, underlines both our readiness and commitment to making the industries see change is possible.”
